INSTALLATION INSTRUCTIONS FOR WINDOWS VISTA
===========================================

*** NOTE: BEFORE installing files, ensure that your
*** Windows Vista has "mf.sys" installed if required
*** by the product you are installing. (If however 
*** your product does not require "mf.sys" and you 
*** install it, that will not cause a problem).
***
*** MF.SYS INSTALLATION
*** =====================
*** A number of LAVA devices install ports as 
*** multifunction devices. The software support in 
*** Windows Vista for multifunction devices was however 
*** omitted by Microsoft in Windows Vista, where it 
*** had been included by default in earlier Windows 
*** versions. For multifunction devices to install 
*** properly in Windows Vista, users first must download
*** and install Microsofts mf.sys file according to
*** the instructions available on the Microsoft web site
*** at:
***
***	http://support.microsoft.com/kb/926171
***
*** Installing "mf.sys" is necessary for the following 
*** LAVA products:
***
*** DSerial-PCI O/S2 Ready version only, "S2" ASIC only
*** Quattro-PCI, "S2" ASIC only
*** Quattro-PCI/LP, "S2" ASIC only
*** Quattro-PCI Powered, "S2" ASIC only
*** LavaPort-Quad, "S2" ASIC only
*** SP-PCI, "S2" ASIC only
***
*** Legacy versions of these products with an "S1" ASIC
*** chipset are not Vista compatible and will not be
*** supported or upgraded for Windows Vista use. 


1) Extract the contents of this archive to a temporary 
   folder.

2) During installation, point the Vista installation
   wizard to the temporary folder.

3) The Vista hardware installer will identify the
   correct file(s) for your card and install them.

=====================================================
LAVA Technical Support
Rev. A00