NOTES ON INSTALLATION OF THE LAVA SERIAL DEVICE ON THE LAVA DSERIAL PCI CARD IN WIN 3.X

1) With the power off on your computer, insert the Lava DSERIAL PCI card into an empty PCI slot.
2) Power up the computer and boot into DOS mode.
3) Run the lavaconf.exe utility found on the Win3.1 directory on the diskette provided.
4) Record the IO addresses and IRQ that it reports.
5) Boot into Win3.X and enter Control Panel and then Ports.
6) Modify the IO addresses and IRQ for the COM3 and COM4 port to match what you have recorded in step 4.
7) Restart Win3.X.

KNOWN ISSUES

Win3.X only has the ability to install up to 4 COM ports.


NOTE: This utility can also be used for the configuration of COM ports under DOS.  Use the addresses and IRQ reported in by this utility to configure the ports in your DOS application.  Refer to the DOS applications manual or Readme.txt for details on how to configure the port.

